Water
How to Purify Water at Home - Boil, Bleach or Filter, With the Exact Amounts
Updated October 10, 2026 - 7 min read - Rainy Day Plan
The short answer
To purify water at home, clear it first, then do one of three things. Boil it: a rolling boil for 1 minute, or 3 minutes above 5,000 feet. Or add plain unscented bleach: 8 drops of 6% or 6 drops of 8.25% per gallon, then wait 30 minutes. Or filter it and then disinfect it. None of these takes out fuel or chemicals.
Which method fits the water in front of you
- If your water company has put out a boil notice, or the water is clear and you have a working stove, boil it. Boiling kills parasites, bacteria and viruses alike.
- With no heat or no fuel, it's bleach, measured by the strength printed on the label. An electric stove is no help in a blackout; the first hours of one are in what to do in a power outage.
- Water from a lake, river or stream gets filtered first and then disinfected, or boiled. Bleach and iodine do poorly on parasites, and surface water is where parasites live.
- If the water may hold fuel or chemicals, or has green scum on it, none of the methods here will do. Use bottled or stored water.
Here's what each method does to each kind of germ.
| Method | Parasites (Giardia, Crypto) | Bacteria | Viruses | Worth knowing |
|---|---|---|---|---|
| Boiling | Yes | Yes | Yes | Leaves metals, salts and chemicals in |
| Bleach or iodine | Poorly | Yes | Yes | Leaves metals, salts and chemicals in |
| Chlorine dioxide tablets | Giardia yes; Crypto not for certain | Yes | Yes | See the tablets section below |
| Filter, 1 micron absolute | Yes | Not all | No | Disinfect afterward |
| Filter, 0.3 micron absolute or smaller | Yes | Yes | No | Disinfect afterward |
| Portable UV light | Yes | Yes | Yes | Small amounts of clear water only |
| Reverse osmosis | Yes | Yes | Yes | Also removes salt |
| Distillation | Yes | Yes | Yes | Also removes heavy metals, salts and most other chemicals |
Clear cloudy water before anything else
Dirt in the water gets in the way of every method. Let cloudy water stand until the particles settle, then pour the clear part into a clean container, or strain it through a clean cloth, a paper towel or a coffee filter. Clearing is only the first half. The water still has to be treated.
Boil it
- Bring clear water to a rolling boil - big bubbles that keep coming when you stir.
- Hold it there for 1 minute, or 3 minutes above 5,000 feet. Water boils at a lower temperature up high, so it needs the extra time.
- Let it cool, then store it in clean, sanitized containers with tight covers.
- Tastes flat? Pour it back and forth between two clean containers, or add a pinch of salt per quart.
Some water boils away while you wait, so start with a bit more than you need. A lid on the pot brings it to the boil faster and burns less fuel, which matters on a camp stove with one canister.
Replace water you treat and store yourself every 6 months, and write the date on each container. Our page on storing emergency water has the cleaning steps and where to keep it.
Bleach it, by the strength on the label
Use regular, unscented household bleach that has been stored at room temperature for less than a year. Bleach loses strength as it sits, so an old bottle may not do the job. Scented and color-protecting bleach, and bleach with added cleaners, aren't for drinking water. Then find the percent on the label and read down that column.
| Water | 6% bleach | 8.25% bleach |
|---|---|---|
| 1 quart or 1 liter | 2 drops | 2 drops |
| 1 gallon | 8 drops | 6 drops |
| 2 gallons | 16 drops (1/4 teaspoon) | 12 drops (1/8 teaspoon) |
| 4 gallons | 1/3 teaspoon | 1/4 teaspoon |
| 8 gallons | 2/3 teaspoon | 1/2 teaspoon |
Stronger bleach needs fewer drops, so go by the number on your label, not by habit.
- Measure with a clean dropper or measuring spoon. With a dropper, go by the drop counts, and don't turn drops into teaspoons yourself: the table lists 16 drops as 1/4 teaspoon in one column and 12 drops as 1/8 teaspoon in the next. With only a measuring spoon and 1 gallon to treat, the amount is 1/8 teaspoon of 5.25% to 6.0% bleach.
- If the water is cloudy, colored or very cold, double the amount.
- Stir, then let it stand for 30 minutes.
- Smell it. There should be a slight chlorine smell. If there isn't, add the same amount again and wait 15 more minutes. Still no smell after that? Pour it out and find other water.
- If the chlorine taste is too strong, pour the water between clean containers and let it stand a few hours.
Example. A 5-gallon jug of clear water and a bottle of 6% bleach: 5 x 8 = 40 drops. Had the water been cloudy or very cold, the amount would double to 80.
If your bottle prints its own directions for disinfecting drinking water, follow the label.
Filter it, then disinfect it
What a filter stops depends on the size of its holes, so read the box:
- An absolute pore size of 1 micron or smaller removes parasites such as Giardia and Cryptosporidium, but not viruses and not all bacteria.
- An absolute pore size of 0.3 micron or smaller removes bacteria and parasites, but not viruses.
- Viruses come out only with nanofiltration or reverse osmosis. Portable filters don't remove them.
- "Absolute" means every hole is that size or smaller. A "nominal" or "mean" size is an average, so some holes are bigger and some germs get through.
- A label certified to NSF standard 53 or 58 for cyst reduction or cyst removal also means it stops parasites.
Because the viruses are still there, the order is filter first, then add a disinfectant. Change cartridges when the maker says to, and write the date on each new one. A hollow-fiber filter that freezes with water inside can crack without showing it, so in winter keep it in an inside pocket or a warm room.
The pitcher or fridge filter you already own is a different tool. Those usually use activated carbon, and their main purpose is better taste and smell. Most aren't designed to remove germs.
Everyday tap water is a different question
If nothing is wrong and you just want better water from the tap, test before you buy. On a public system, read the water quality report your utility puts out every year. On a private well, test at least once a year. Then choose a filter that removes what the test found - and if it found nothing, you may not need one.
If you do buy a filter, look for an NSF certification on the label. Each standard covers one job: 42 is taste and odor, 53 is cyst reduction, 58 is reverse osmosis and 62 is distillation. A point-of-use filter usually serves a single tap, such as the kitchen sink, while a whole-home filter, also called point-of-entry, treats water as it comes into the house.
Tablets, UV light and distillation
With tablets, follow the label exactly. Iodine and chlorine tablets won't kill Cryptosporidium. Chlorine dioxide tablets are less certain against it: they're rated from "will kill" it, if you follow the instructions correctly, down to "somewhat effective". So for lake or stream water, don't count on tablets alone - filter first or boil. Tablets are the backup for a pack or a car kit; at home, boiling or measured bleach comes first.
Iodine has a caution of its own. Avoid iodine-treated water if you're pregnant, have thyroid problems or are hypersensitive to iodine, and no one should drink it for more than a few weeks at a time. Not sure? Ask your doctor or pharmacist.
A portable UV light can kill parasites, bacteria and viruses in small amounts of clear water. It doesn't work well in cloudy water, because small particles can block germs from the light.
To distill water, fill a pot halfway. Tie a cup to the handle of the lid so the cup hangs right-side-up when the lid sits upside-down, without dangling into the water. Boil for 20 minutes. What drips from the lid into the cup is distilled. It's the one kitchen method that also takes out heavy metals, salts and most other chemicals, but you only get a cupful at a time.
What no home method can fix
- Water containing fuel, toxic chemicals or radioactive material can't be made drinkable by boiling or disinfecting. Use bottled water or your stored emergency water.
- Boiling and bleach don't remove heavy metals, salts or most other chemicals.
- Toxins from a harmful algal bloom stay in boiled water, and boiling can concentrate them.
If floodwater reached your well, or you aren't sure what's in the water, have a sample tested by a state-certified lab before you drink it again; the county health department can tell you which labs do it.
Sources
Every number in this article comes from these public sources, and we checked each one before it went up.
- CDC - Emergency water treatment: boiling, disinfecting and filtering
- CDC - Water treatment options when hiking, camping or traveling
- CDC - About choosing home water filters
- CDC - Preventing illnesses caused by harmful algal blooms
- EPA - Emergency disinfection of drinking water
- Ready.gov (FEMA) - Water
- CDC - How to create and store an emergency water supply
- EPA - National Primary Drinking Water Regulations




































